>>TOP PAGE

Mechanical L.S.D.
■ The TRD mechanical LSD is 1.5-way selective, and can optionally be switched over to a 2-way without any additional parts. (It can only be 1.5-way on Vitz models and 2-way on FR vehicles.)
With the 1.5-way, the LSD functions most during acceleration, and is weaker when not accelerating. (The 1.5-way is designed for novices, since vehicle control becomes more difficult when the engine is used to brake.)
With the 2-way, the LSD functions when not accelerating as well, providing excellent vehicle control under a variety of conditions.
■ Because the limited slip capacity is provided using a number of clutch plates, it exhibits a direct, reliable LSD effect.
Recommended oil: FF vehicles............TRD LSD Oil FF
FR vehicles............TRD LSD Oil FR

Note: Can be used only on FF and midship engine placement vehicles with manual transmission.

Mechanical L.S.D.

 This list is based on Japanese model and shown in Japanese domestic price.
Vehicle Model Code Year Model Engine Model Part No. Code List Price(JPY) Remarks
ALTEZZA SXE･GXE10 98.10- 3S-GE, 1G-FE 41301-RA010 F 85, 000 　
ALTEZZA gita JCE15W 01.07- 2JZ-GE 41301-AE804 F 79, 000 2 way For front
41301-AE805 F Discontinued 1.5 way
ARISTO UZS143 92.10-97.8 1UZ-FE 41301-JS402 F 105, 000 For rear, Exclusive side gear shaft required. (*3)
JZS147 91.10-97.8 2JZ-GE､2JZ-GTE For vehicle with factory-equipped L.S.D.,
exclusive side gear shaft required. (*3)
JZS16# 97.8-03.5 2JZ-GE､2JZ-GTE
CARINA TA63 82.10-85.7 3T-GTE 41301-RA010 F 85, 000 side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
RA63 81.9-82.10 18R-GEU
CARINA SURF AT170G 　 5A-F(E) 41301-AW004 F 90, 000 For M/T model
ST170G, CT170G 　 4S-FI, 4S-FE, 2C 41301-ST804 F 96, 000
CELICAXX GA61 81.7-86.1 1G-GEU 41301-RA010 F 85, 000 side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
MA61･63 M-TE, 5M-GE
CELICA
(Except GT-FOUR)		 TA64 82.10-83.8 4T-GTEU 41301-RA010 F 85, 000 side bearing is required. (#1)
TA63 82.10-85.7 3S-GTE side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
RA63 81.7-82.8 18R-GEU
AA63 83.8-85.7 4A-GEU
ST162･163 85.8-89.8 3S-FE, 3S-GELU, 4S-FI 41301-ST804 F 96, 000 　
ST182･183 89.9-93.9 3S-FE, 3S-GE 　
ST202･203 Except below model 93.10-99.9 3S-FE, 3S-GE Includes helycal L.S.D. model
Super strut suspension model
equipped with viscous L.S.D.		 93.10-95.8 3S-GE 41301-SW211 F Discontinued For vehicle with viscous L.S.D.
ZZT23# 99.9- 2ZZ-GE､1ZZ-FE 41301-ST804 F 96, 000 　
CELICA GT-FOUR ST165 86.10-89.8 3S-GTE 41301-ST000 F Discontinued For rear, Exclusive side gear shaft required. (*1)
ST185 89.10-94.1 3S-GTE For rear
ST205 94.2-99.9 3S-GTE
COROLLA
SPRINTER
(2WD)		 AE85 83.5-87.4 3A-U 41301-TE003 F Discontinued 　
AE86 83.5-85.10 4A-GEU 41301-TA005 F Discontinued 2 way For frame No. upto 0193814 and No. upto 5066285
41301-TA006 F Discontinued 1.5 way
85.10-87.4 41301-AE804 F 79, 000 2 way For frame No. after 0193815 and No. after 5066286
41301-AE805 F Discontinued 1.5 way
AE91･92 87.5-92.4 4A-GE, 5A-F, 5A-F(H)E 41301-AW004 F 90, 000 For M/T model
AE92Super Charger 87.5-91.6 4A-GZE 41301-SW202 F Discontinued 　
AE10#･11# 91.6-00.8 4A-FE, 4A-GE, 5A-FE 41301-AW004 F 90, 000 For M/T model
AE101Super Charger 91.6-95.5 4A-GZE 41301-SW211 F Discontinued For M/T model, side bearing is required. (#2)
COROLLA
SPRINTER
(4WD)		 AE95 87.10-91.6 4A-F(E) 41301-AE804

41301-AE805		 F

F		 79, 000

Discontinued		 2 way

1.5 way		 For M/T model rear
AE104､CE104 91.9-02.6 4A-FE, 2C For M/T model rear,
Exclusive side gear shaft required. (*2)
CE109 91.9-02.6 2C
For M/T model rear
COROLLA
(2WD)		 NZE120 00.8- 2NZ-FE 41301-EP703 F Discontinued 　
NZE121 00.8- 1NZ-FE 41301-AW004 F 90, 000 　
CE121 00.8-04.4 3C-E 41301-ST804 F 96, 000 　
COROLLA FIELDER ZZE122･123G 00.8- 1ZZ-FE, 2ZZ-GE 41301-ST804 F 96, 000 For M/T model
NZE121G 00.8- 1NZ-FE 41301-AW004 F 90, 000
COROLLA WAGON AE91G 87.5-91.5 5A-FE 41301-AW004 F 90, 000 For M/T model
AE100G･101G 91.5-00.8 4A-GE, 5A-FE 41301-AW004 F 90, 000
AE104G 91.5-00.8 4A-FE 41301-AE804 F 79, 000 2 way For rear,
Exclusive side gear shaft required. (*2)
41301-AE805 F Discontinued 1.5 way
COROLLA RUNX
ALLEX		 ZZE123･128 01.1- 2ZZ-GE 41301-ST804 F 96, 000 　
CORONA TT142 82.10-87.12 3T-GTE 41301-RA010 F 85, 000 side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
RT141 82.1-82.10 18R-GEU
CORONA
CORONA EXiV
CARINA
CARINA ED
(2WD)		 ST170 88.5-92.8 4S-FI, 4S-FE 41301-ST804 F 96, 000 　
ST190･210､CT190･210 92.8-01.12 3S-F(S)E, 4S-FE,
2C, 2C-T		 　
AT190･192 AT21# 92.8-01.12 4A-FE, 4A-GE,
5A-FE, 7A-FE		 41301-AW004 F 90, 000 　
ST202･203 Except below model 93.10-98.4 3S-FE, 3S-GE 41301-ST804 F 96, 000 Includes helycal L.S.D. model
Suoer strut suspension model
equipped with viscous L.S.D.		 93.10-95.8 3S-GE 41301-SW211 F Discontinued For vehicle with viscous L.S.D.
CORONA
CARINA
CORONA EXiV
CARINA ED
(4WD)		 AT175 88.8-92.5 4A-FE 41301-AE804

41301-AE805		 F

F		 79, 000

Discontinued		 2 way

1.5 way		 For rear,
Exclusive side gear shaft required. (*2)
ST195･215､CT195･215 92.2-97.12 3S-FE, 2C, 2C-T
ST205 94.5-98.4 3S-GE
CROWN GS130 87.9-99.4 1G-(G)E, 1G-GP 41301-RA010 F 85, 000 side bearing is required. (#1)
GS131 87.9-88.6 1G-(G)E, 1G-FE side bearing is required. (#3)
88.6-95.12 1G-(G)E, 1G-FE 　
87.9-91.10 1G-GZE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*7)
YM･MS130, LS130･131 87.9-99.4 M-P, 3Y-P,
2L, 2L-T, 2L-THE		 41301-RA010 F 85, 000 side bearing is required. (#1)
(LS131: Hub ring replacement unnecessary)
MS135･137 87.9-91.10 　 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*7)
JZS130 90.8-99.4 1JZ-GE 41301-RA010 F 85, 000 side bearing is required. (#1)
UZS131 89.9-91.10 1UZ-FE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*7)
JZS131･133･135 90.8-95.8 1JZ-GE, 2JZ-GE Exclusive side gear shaft required. (*7)
GS･LS141 91.10-95.8 2L-TE, 1G-FE 41301-RA010 F 85, 000 　
JZS141 91.10-95.8 1JZ-GE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*7)
JZS143･145 91.10-95.8 2JZ-GE Exclusive side gear shaft required. (*7)
JZS155(Except MAJESTA) 95.8-01.8 2JZ-GE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*6),
97.7-(※3)
JZS171(4A/T) 99.8- 1JZ-FSE 41301-RA010 F 85, 000 Exclusive side gear shaft required. (*6)
JZS171(Turbo) 99.8- 1JZ-GTE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*6)
JZS171(5A/T)･175 99.8- 1JZ-FSE, 2JZ-FSE Cutting process (6mm) on side gear shaft required.
JZS177､UZS171･175 99.8-03.5 2JZ-FSE, 1UZ-FE 41301-JS402 F 105, 000 　
CROWN MAJESTA UZS141･143･145 92.10- 1UZ-FE 41301-JS402 F 105, 000 For vehicle with factory-equipped L.S.D.,
exclusive side gear shaft required. (*3)
JZS147･149 91.10- 2JZ-FE
JZS155, UZS151･157 95.8- 2JZ-GE, 1UZ-FE ※3
UZS155 95.8- 1UZ-FE 95.8-97.7
Exclusive side gear shaft required. (*3)
CYNOS EL44･5# 91.1-99.7 4E-FE, 5E-F(H)E 41301-EP703 F Discontinued Can't install to model equipped with viscous L.S.D.
HARRIER SXU15W, MCU15W,
ACU15W(4WD)		 97.12-03.2 1MZ-FE, 2AZ-FE
5S-FE		 41301-ST000 F Discontinued For rear, For vehicle not equipped with optional L.S.D.,
side gear shaft(*1)x2
and snap ring(90521-28004x2) are required.
HIACE WAGON YH51G, LH51G YH61G, LH61G 85.8-89.8 3Y-U 2L, 2L-T 41301-VN001 F Discontinued side bearing is required. (#1)×2
LH100G 89.9-93.7 2L, 2L-T(E) Side bearing(#1) required to models
except turbo diesel model.
LH110G, RZH110G 89.9-93.7 2L, 1RZ-E side bearing is required. (#1)×2
LH140G 90.10-93.7 2L
RZH100G, RZH101G 89.8- 2RZ-E
KZH100G･110G･120G 93.8- 1KZ-TE 　
YH57G 87.8-89.7 3Y-U side bearing is required. (#1)×2
LH107G 89.8-93.7 3L For 4A/T model, side bearing (#1)×2 required.
LH107W 90.10-93.7 3L
LH117W 90.10-93.7 3L 　
KZH106G, KZH106W 93.8- 1KZ-TE Side bearing(#1)×2 required to 99.7 model
w/o ABS or A/T model w/o L.S.D.
KZH116G 93.8- 1KZ-TE For 4A/T w/o L.S.D. model before 99.7,
side bearing(#1)×2 required.
KZH126G 93.8- 1KZ-TE 　
HILUX SURF KZN130W･G LN130W･G･131V
VZN130W･G YN130G		 　 1KZ-TE, 2L-TE
3L 3VZ-E, 3Y-E		 41301-VN001 F Discontinued For LN130G and 131V model before 90.8, side bearing(#1)x2 are requierd.
KDN185W･G KZN185W･G
RZN180W･185W VZN180W･185W		 　 1KD-FTV, 1KZ-TE
3RZ-FE, 5VZ-FE		 For rear
IPSUM(4WD) SXM15G 96.5-98.4 3S-FE 41301-ST000 F Discontinued For rear, Exclusive side gear shaft required. (*1)×2､
Snap Ring(90521-28004×2)
LAND CRUISER PRADO KZJ90･95, VZJ90･95 RZJ90･95 　 5VZ-FE, 3RZ-FE
1KZ-TE		 41301-VN001 F Discontinued For rear
MARK X GRX125 04.11- 4GR-FSE 41301-RA010 F 85, 000 　
GRX120 04.11- 4GR-FSE 41301-MZ210 F 91, 000 Cutting process (6mm) on drive shaft required.
GRX121 04.11- 3GR-FSE
MR2 AW10･11 84.6-89.9 3A-LU, 4A-GELU 41301-AW004 F 90, 000 For M/T model
AW11Super Charger 86.8-89.9 4A-GZE 41301-SW202 F Discontinued 　
SW20 89.10-99.10 3S-GE 41301-ST804 F 96, 000 For M/T model
SW20Turbo 89.10-91.12 3S-GTE 41301-SW202 F Discontinued 　
91.12-99.10 3S-GTE 41301-SW211 F Discontinued 　
MR-S ZZW30 99.10- 1ZZ-FE 41301-ST804 F 96, 000 　
PLATZ SCP11 99.8- 1SZ-FE 41301-NP100 F Discontinued Set in 1.5 way only.
M/T, Except model w/o ABS
NCP12 99.8- 1NZ-FE 41301-EP703 F Discontinued For M/T model
RAV4 SXA15G･16G
SXA10G･W
SXA11G･W		 w/o original L.S.D. 94.5-00.5 3S-FE 41301-AE804 F 79, 000 2 way For rear,
Exclusive side gear shaft required. (*2)
3S-GE 41301-AE805 F Discontinued 1.5 way
w/ original L.S.D. 41301-ST000 F Discontinued 2 way 　
ACA20W･21W w/o original L.S.D. 00.5- 1AZ-FSE 41301-AE804 F 79, 000 2 way For rear,
Exclusive side gear shaft required. (*2)
41301-AE805 F Discontinued 1.5 way
w/ original L.S.D. 41301-ST000 F Discontinued 2 way
SERA EXY10 90.3-95.12 5E-FHE 41301-EP703 F Discontinued 　
SOARER GZ10 81.2-85.12 1G-GE 41301-RA010 F 85, 000 side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
MZ10･11 81.2-85.12 M-TEU, 5M-GEU
MZ12 85.1-85.12 6M-GEU A/T, side bearing is required. (#3)
For vehicle with optional L.S.D.,
Exclusive side gear shaft required. (*4)
GZ20 86.1-89.1 1G-(G)E 41301-RA010 F 85, 000 side bearing is required. (#3)
(88.6-: Bearingreplacement unnecessary)
89.1-91.4 1G-FE 　
1G-GE M/T
86.1-88.7 1G-GTE 41301-MZ210 F 91, 000 　
88.7-91.4 M/T, Exclusive side gear shaft required. (*7)
(Shaft replacement unneccesary for vehicle
with optional L.S.D.)
89.1-91.4 1G-GE A/T, Exclusive side gear shaft required. (*7)
(Shaft replacement unneccesary for vehicle
with optional L.S.D.)
MZ20･21 86.1-91.4 7M-GTE 　
JZZ30･31 91.6-00.12 1JZ-GTE､2JZ-GE 41301-JS402 F 105, 000 For vehicle with factory-equipped L.S.D. before 96.8, exclusive side gear shaft required. (*3)
UZZ3# 91.6-00.12 1UZ-FE
UZZ40 01.4-03.5 3UZ-FE 　
STARLET
(2WD)		 EP71､EP71Turbo 84.10-89.11 2E-(E)LU, 2E-TELU 41301-EP703 F Discontinued 　
EP82･91 89.12-99.7 4E-FE
EP82 Turbo EP91 Turbo 89.12-99.7 4E-FTE 41301-AW004 F 90, 000 Can't install to model equipped with viscous L.S.D.
SPRINTER CARIB AE95G 88.2-95.8 4A-FHE 41301-AE804 F 79, 000 2 way For rear
41301-AE805 F Discontinued 1.5 way
41301-AW004 F 90, 000 　
AE114G AE115G 95.8-02.7 4A-FE, 7A-FE 41301-AE804 F 79, 000 2 way For rear,
Exclusive side gear shaft required. (*2)
41301-AE805 F Discontinued 1.5 way
SUPRA GA70 86.2-88.8 1G-(G)E 41301-RA010 F 85, 000 side bearing is required. (#1)
(Bearing replacement unnecessary for 1G-G model
with optional L.S.D.)
88.8-90.8 1G-FE 　
88.8-90.8 1G-GE 41301-MZ210 F 91, 000 Exclusive side gear shaft required. (*7)
(Shaft replacement unneccesary for vehicle
with optional L.S.D.)
86.2-90.8 1G-GTE 　
90.8-93.5 1G-GE 1G-GTE For vehicle with factory-equipped L.S.D.,
exclusive side gear shaft required. (*7)
MA70 86.2-90.8 7M-GTEU 　
JZA70 90.8-93.5 1JZ-GTE For vehicle with factory-equipped L.S.D.,
exclusive side gear shaft required. (*7)
JZA80 93.5-96.5 2JZ-GTE 41301-JA800 F 100, 000 93.5-96.5 6M/T model exclusive
Except above 2JZ-GE､2JZ-GTE 41301-JS402 F 105, 000 Exclusive side gear shaft required
for 93.5-96.5/GZ, SZR. (*3)
Side gear shaft required for 93.5-96.5 model follows, RZ(A/T), RZ-S(A/T) and SZ with factory-equipped L.S.D.(*3)
TERCEL
CORSA
COROLLA II
(2WD)		 EL31Turbo 86.5-90.8 3E-TE 41301-AW004 F 90, 000 　
EL41･43･5# 90.9-99.7 4E-FE, 5E-F(H)E 41301-EP703 F Discontinued 　
Vitz
(2WD)		 SCP10 99.1-05.2 1SZ-FE 41301-NP100 F Discontinued Set in 1.5 way only.
Except model w/o ABS
NCP10 99.10-05.2 2NZ-FE 41301-EP703 F Discontinued 　
NCP13 00.10-05.2 1NZ-FE 41301-AW004 F 90, 000 　
NCP91 05.2- 1NZ-FE 41301-AW004 F 90, 000 　
※1)Cutting process on side gear shaft required to JZX100(NA 5A/T model). Exclusice side gear shaft(*2) required to vehicle with optional L.S.D.
※2)Side gear shaft(*2) required to frame No. upto JZX101-0003904 and No. upto JZX101-6002099 of JZX101(96.9-97.8).
Cutting process (tip 6mm) on side gear shaft required to frame No. after JZX101-0003905 and No. after JZX101-6002100.
※3)Side gear shaft(*2) required to frame No. upto JZS155-0090748 and No. upto JZS155-8017171 of JZS155.
Cutting process (tip 6mm) on side gear shaft required to frame No. after JZS155-0090749 and No. after JZS155-8017172 of JZS155.

Exclusive Side Gear Shaft Part No. Code Qty List Price(JPY) Remarks
*1 41309-20030   2 Toyota Genuine Part "0" Please use snap ring (90521-28004)x2.
*2 41309-AT701 F 2 Discontinued Please use snap ring (90521-26002)x2.
*3 41309-24020   2 Toyota Genuine Part "0"
*4 41309-22012   2 Toyota Genuine Part "0"
*5 41309-22040   2 Toyota Genuine Part "0"
*6 41309-22050   2 Toyota Genuine Part "0"
*7 41309-14060   2 Toyota Genuine Part "0" or process on original shaft
Side Bearing Part No. Code Qty List Price(JPY) Remarks
#1 90368-50024   2 Toyota Genuine Part "0"
#2 90366-57016   1 Toyota Genuine Part "0" For front side only
#3 90368-50006   2 Toyota Genuine Part "0"

Drive Pinion Tool (For initial torque measurement special tool. 2pcs. included.)
･Making it possible easily to measure intial torque when installing L.S.D. and overhaul.
･It's possible to measure initial torque on condition L.S.D. mounted on vehicle by removing drive shafts.
･Using 2pcs. In one set makes it possible to measure initial torque, furthermore, using only 1pce. Makes it possible to measure pri-load of side bearing.
Part No. Code List Price(JPY) Remarks
09556-SP000 E Discontinued 41301-TA005/TA006
09556-SP010 E Discontinued 41301-AE804/AE805/NP100/EP703/AW004
09556-SP020 E Discontinued 41301-ST803/ST804
09556-SP030 E Discontinued 41301-SW202/SW211
09556-SP040 E Discontinued 41301-RA002/SE100
09556-SP050 E Discontinued 41301-MZ201/JX001/VN001